These pictures are of the fabric still on the loom from Saturday when I started weaving it.
This picture is the fabric done and off the loom.
Now I have it soaking in wash water to wet set (shrink) it. Before I did that I draped the fabric over me to see if it was wide enough and long enough and it was. Since this is made of a hundred percent wool I have it in cold water so there should be a normal amount of shrinkage I’m hoping. After I finish washing and drying the fabric I will finish off the vest. So hopefully I will have a wearable and fitting loom fitted vest. I will let everyone know hopefully tomorrow.
3 comments:
Chuck,
Did you use two shuttles to weave the fronts?
I'm working on the design for a loom fitted vest, but am putting the width of the vest along the length of the warp and toying with different ways of handling armholes.
Your way is different than mine, but boy does it look good!
-Jessica
I did use two shuttles for the front panels. I wove the back first then wove the front panels with two shuttles.
thanks for sharing......
___________________
Rozydesouza
Get 28 movie channels for 3 months free
Post a Comment